Home>Electrical>Xantrex (Statpower) 10 Amp Hard Wire

TRUECHARGE 10hw Safety Features:

  • Over-temperature shutdown
  • Non-sparking feature for safe battery connection
  • Reverse polarity and short-circuit protection

TRUECHARGE 10hw Product Features:

  • Fully Automatic Operation:
  • Charger can be left permanently attached to batteries for true "connect and forget" operation
  • Battery Type Selector Switch:
  • Adjust charger output for the different charging requirements of sealed (gel) and conventional flooded (wet) batteries
  • Dual Battery Charging:
  • Two separate DC positive terminals
  • Battery Status LED indicators:
  • Display stage of charge and battery ready status
  • Covered Wiring Compartment: keeps wires bundled and provides access to external fuses and battery type selector switch.
  • Compact Size and Weight:
  • Designed for easy installation

TRUECHARGE 10hw
(*Depending on Settings)

Micro-processor controlled, 10 amp continuous duty, multi-stage battery charger  The TRUECHARGE 10 is designed for batteries from 25 amp-hours to 200 amp-hours. Using alligator clip leads for battery connection, this portable charger offers quicker charging times than many 15, 20, and 30 amp rated ferroresonant battery chargers due to multi-stage charging capability. The TRUECHARGE 10 gives ripple-free charging performance when charging from inconsistent line voltage as typically seen from dock power or generators. Ultimately, this saves wear and tear on your batteries and greatly extends their lifetime.


Output Current 10 amps continuous duty
Output Voltage  Charge 14.2 - 14.4 V DC*
Output Voltage   Float 14.2 - 14.4 V DC*
Input Voltage Range 90 - 135 V AC, 48 - 62 Hz
Weight 3.0 lbs./ 1.4 kg.
Dimensions (L x W x H) 9.0" x 6.5" x 2.75" / 23 cm x 16.5 cm x 7 cm
Recommended Use 12V lead-acid batteries: 25 Ah to 200 Ah

© copyright 2006 River Marine Supplies and Distributors 1023 Clark Drive, Vancouver, B.C. Canada V5L 3K1