Home>Electrical>Xantrex (Statpower) TC20

Micro-processor controlled, 20 amp continuous duty, multi-stage battery charger  Ideal for deep-cycle marine, RV, and industrial batteries; the  TRUECHARGE 20+ is designed for batteries from 100 amp-hours to 400 amp-hours. The TRUECHARGE 20+ offers three bank battery charging capability with one charger. Microprocessor controlled, it provides fully automatic battery charging for faster charging times than many 40 and 50 amp rated ferroresonant battery chargers. This is made possible via the four-stage charging capability of the TRUECHARGE 20+.

TRUECHARGE 20+ Safety Features:

  • Over-temperature shutdown
  • Overload protection
  • Ignition protection
  • Non-sparking feature for safe battery connection
  • Reverse polarity and short-circuit protection
  • Transformer isolated to protect against electrolysis
  • CSA approved to CSA & UL standards for Marine, RV, and Industrial use

Available Options:

  • Remote display panel                
  • Remote temperature sensor       

 

TRUECHARGE 20+ Product Features:
  • Fully Automatic Operation:
  • Charger can be left permanently attached to batteries for true "connect and forget" operation
  • Battery Type Selector Switch:
  • Adjust charger output for the different charging requirements of sealed (gel), conventional flooded (wet), and Absorbed Glass Mat (AGM) batteries*
  • Three Battery Bank Charging:
  • Three separate DC positive terminals  (Available on 115 Vac models only)
  • Charge Mode Selection Switch:
  • Select 3-step (bulk/absorption/float) or 2-step (bulk/absorption/off) depending on battery manufacturer recommendation. Select 13.5 volt fixed to use as a pure DC power supply
  • Battery Status LED indicators: Displays state of charge, voltage, and current output
  • Equalization Mode: (Flooded batteries only) Helps prevent battery sulfation maximizing the life of your batteries
  • Automatic Top-up Cycle:
  • A 21-day automatic battery top-up cycle prevents self discharge during storage periods
  • Wide Input Voltage Range:
  • Charge output and accuracy not affected by "drooping" shore power voltages as low as 90VAC
  • Temperature Compensation: Adjust charging voltage to compensate for battery temperature, providing an accurate charge in any climate
  • Compact Size and Weight:
  • Designed for easy installation

TRUECHARGE 20+ Specifications

Output Current 20 amps continuous duty
Output Voltage   Charge 13.8 - 14.8 V DC*
Output Voltage   Float 13.8 - 14.8 V DC*
Output Voltage Equalize 15.5 V DC @ 4A maximum
Input Voltage Range 90 - 135 V AC, 50 - 60 Hz (TRUECHARGE 20+)
Battery Connections Triple Output Terminals
Efficiency 85%
Weight 5.5 lbs./ 2.5 kg.
Dimensions (L x W x H) 15" x 6.5" x 2.75" / 39 cm x 16.5 cm x 7 cm
Recommended Use All 12V deep-cycle batteries: 100 Ah to 400 Ah

(*Depending on Settings)

Regulatory Approval

CSA/NRTL approved to 107.2* UL 458/1236*/1564 LR 86581 *including the Marine supplement for use on boats NRTL/C Ignition Protected
Other: KKK-A-1822D compliance available by special order
Specifications subject to change without notice

© copyright 2006 River Marine Supplies and Distributors 1023 Clark Drive, Vancouver, B.C. Canada V5L 3K1