LO-TIGRES Aluminium 1000 Watt
LO-TIGRES-W White 1000 Watt
LO-TIGRES-12 Aluminum 1200 Watt
LO-TIGRES-W-12 White 1200 Watt
LOOIL Replacement oil (1 required)
VCO20 Black cover with snaps
VCO21 Blue Cover with snaps

The Tigres is an industry standard that all other anchor winch manufacturers try to attain. It has been on the market place for more than 25 years and has needed little room for improvement. The Tigres is offered in either white or anodized aluminum case with either a 1000W or 1200W motor. The 1000W motor gives the Tigres a 1210 lb. capacity and the 1200 W motor 1364 lbs. The haulage speed is 46 to 82 ft. per min. Gypsy sizes are 1/4" to 3/8". Metric sizes are also available. The Tigres runs in an oil bath and weighs in at 50 lbs. It is suitable for vessels up to 46 ft. Manual operation is standard in case of electrical failure.

Lofrans have been producing windlasses for more than 25 years and they are sold all over the world to the most important and qualified shipyards. Lofrans are nowadays the leader in Europe for the sale of anchor windlasses. This popularity has been won during years for the following reasons one cannot ignore.

  • DESIGN - Lofrans anchor windlasses are particularly appreciated for their excellent design which perfectly fits all boats.
  • QUALITY - It has been built over years. That has allowed Lofrans to obtain a product of high reputation resulting from the experience acquired in the production of thousands windlasses and in the continuous perfection of every part.
  • PERFORMANCE - It is at the top for the high mechanic efficiency. Each model will always give the best result, which comes by the combination of lifting pulling power, haulage speed and current consumption.
  • RATIO BETWEEN QUALITY AND PRICE - The competitive price in relation to the high level achieved in quality and performance is the main reason for Lofrans' success.
  • COMPLETE RANGE - It includes about 20 models suitable for boats from 6 up to 35 m. and you will find for sure the windlass which will best suit a boat.

Specifications:

  • Made in special seawater resistant light alloy (UNI 3055 or UNI 3058) polished and anodized.
  • Main shaft in stainless steel AISI 431.
  • Geared collar for worm screw in bronze aluminum (UNI 5274).
  • Worm screw in steel 38 NCD 4.Gearing in steel or bronze.
  • Screws and other outer details in stainless steel 304 or 316.
  • High torque motor protected against water infiltration (IP 56).
  • Reduction-gear specially built for marine use with a high mechanic efficiency due to the ratio reduction which is between 1/55 and 1/70 (other manufacturers assemble normal industrial reduction-gears for different uses which are therefore, not suitable for marine use).
  • Oil bath lubrication.
  • Different motor power and voltage on same model.
  • Easy installation on boat deck.
© copyright 2006 River Marine Supplies and Distributors 1023 Clark Drive, Vancouver, B.C. Canada V5L 3K1